Are the cables malfunctioning on your garage door? The cables are a crucial piece of equipment that ensures the smooth and effective operation of your garage door. Depending on your garage door spring design system, there are several varying cable lengths, cable configurations, and cable sizes.
Garage Door Cable Replacement Parts And Repair Dangers
Garage door cables can be a very harmful part of the door to replace or repair without the correct training and tools. The wires are usually under incredible amounts of tension and must be handled with care by a trained professional. For safety reasons, we suggest that when faced with a broken garage door cable, contact your local and professional garage door repair company.
Types Of Garage Door Cables
Depending on the spring system installed on your garage door, different cables will be needed.Torsion spring systems found horizontally on a bar above the door. Typically, they have cables looped at one edge and have a crimped stop at the other side. The crimped stop edge of the cable is secured at the drum, while the looped end of the cable is fastened to the fixture at the bottom of the door. The cable covers around the drum as the door moves up and uncovers from the drum as the door moves downward.
Extension spring design systems that stretch down both sides of the track need safety cables and lift cables. Safety cables are the essential elements of any extension spring door. A broken cable or spring on an extension spring door minus the safety cables can cause severe harm. Safety cables run through the extension springs to prevent any injury or damage if the spring were to break. Lift cables are also vital on extension spring doors. These connect from the bottom, up through a pulley, then to extension spring, and ultimately are secured back to the track.
Regardless of the system, while the spring offers the power to open the door, the cables hold the weight as the garage door moves up and does. When a cable breaks, your door becomes manageable and must be repaired for it to function correctly once again.
What About Garage Door Repairs?
While garage door cables are built with metal and developed to be healthy, they also remain flexible to cover around drums or be pulled repeatedly through a pulley system. With that said, garage door cables are not resilient to breaking.
Just like other moving parts, garage door lift cables take on wear and tear. Over a while, the wires can fail and eventually break. You should review your garage door cables a few times a year for damage. At the initial sign of any fraying, a professional garage door repair company should be called for a replacement. Another major cause of broken cables is rust. Rust can corrode the cable, and unless replaced, make your garage door inoperable.
Should your garage door be unlevel, inspect the cables? In such a case of a torsion spring setup, it is common to see that the cable has wrapped around the drum erroneously and become jammed. This will cause one side of the door to stick while being lowered. In other cases, cables may become entirely unwound from the drum and need to be rejoined. Keep in mind, reattaching the cables is a dangerous task given the extreme tension the spring is under. In the case of an extension spring setup, examine the pulleys. When these become worn out, the cables will not slide smoothly, and the door may become stuck or uneven. In this instance, the lifts may need to be replaced.
Leave This Repair To The Experts
If you find yourself with a broken garage door cable, it is suggested not to use it. Opening and closing your garage door with a broken cable could harm the door, resulting in a costlier repair. Call Garage Door Pros for professional garage door cable repair services.
Garage Door Repair Contractor 